6 DIY environment-friendly pet jobs

DIY tasks aren’t just fun– they’re environmentally friendly! Decrease your fur babe’s carbon pawprint by attempting your hand at one or more of these homemade pet products.

This Earth Day, we’ve pulled together a few of our preferred DIY pet tasks for you to try in your home. Using natural and recycled materials minimizes waste, cuts down on the pollution produced by shipping store-bought items … and it’s fun!

1. Do It Yourself pet-friendly space and linen spray

What you’ll need

  • 16 oz glass bottle
  • 8 oz pure water
  • 2 oz natural witch hazel (or substitute 2 tsp Epsom salts)
  • 2 tablespoons baking soda
  • 15 drops eucalyptus vital oil *
  • 15 drops lemon necessary oil *
  • 15 drops peppermint important oil *

* Be sure to use pure, unadulterated, high quality vital oils.


Using a funnel, combine all ingredients in your glass bottle. Swirl gently to integrate and spritz away!

2. Easy no-sew denim pet dog toy

What you’ll require 9 25

“strips of denim An elastic band Guidelines a)Fasten your jeans strips together on one end using the flexible.

Leave 5″ of fabric above the elastic. b)Shut the fastened end of the denim strips in a door or have a pal hold it for you.

c) Divide the strips into 3 sets of three.

d) Start intertwining! Cross the set of strips on the far left over the middle pair, then do the same with the best strips. Keep the braid as tight as possible.

e) Continue up until you have 5″ of unbraided material left.

f) Fasten the staying unbraided fabric by separating one set of strips.

g) Tie two of them in a knot, then cover them around the other two sets of strips and tie them in another knot.

h) Remove the elastic band and repeat the above step on the opposite end.

3. Fleece animal blanket

What you’ll require 2 6.5 ‘sheets of fleece Ruler Scissors Instructions Lay the sheets of fleece on top of each other on the floor or a big table, with the right sides facing out.
  • Make certain the edges compare, and cut off any additional fabric. Utilizing your ruler, procedure and eliminate a 3″ to 6″square at each corner of the sheets. The size you pick will be the size of your blanket’s
  • fringe. Repeat this for each corner, making certain to cut through both layers of fleece.
  • Cut strips of material along the edges of your blanket– this is your fringe. Each strip ought to be the same length as your corner squares, and can be anywhere from 1″ to 2″ wide.
  • Tie the fringe strips together using a tight square knot (like the knot you utilize to tie shoelaces) on every one. Try not to fold the fabric by pulling the knots too tight.
  • Resist the desire to keep the finished blanket for yourself!
  • 4. Do It Yourself doggy toothpaste

    What you’ll need

    • 3 tablespoon coconut oil
    • 1/2 tsp carefully sliced mint leaves
    • 1/4 tsp baking soda


    Mix all active ingredients together in a little bowl and store in a covered container at space temperature level.

    5. Recycled animal bed

    What you’ll require

    • Sweatshirt
    • Pins
    • polyester filling
    • square or circular pillow (optional)
    • scissors
    • needle
    • thread OR stitching maker


    Step 1: Choose a sweater.

    Select an old wool or Sherpa sweatshirt that you never ever wear. If the sweater has a high neck, sufficed off and set it aside for future patch-jobs.

    Step 2: Sew the neckline. Turn the sweatshirt inside-out and sew a straight line simply below the neckline to seal it shut. You can use a sewing device or do it by hand utilizing the thread color of your choice. When you’re done, turn the sweatshirt right-side-out. Step 3: Sew across the sweatshirt from underarm to armpit. Use pins to mark out a straight line throughout the front of your sweatshirt from underarm to armpit. You can turn the sweatshirt inside-out for this step also to make sure a better surface. Sew simply above or just listed below the pins. Get rid of the pins and turn the sweatshirt right-side-out.

    Step 4: Stuff the arms of the sweatshirt.

    Fill the arms with the stuffing, ensuring it’s loaded as securely as possible without extending the product. Leave an inch of material unstuffed at the cuff of among the sleeves so you can stitch them together.

    Step 5: Sew the arms together.

    Tuck the cuff of the fully-stuffed sleeve inside the other so that they overlap entirely. Stitch the arms together as firmly as possible along the edge of the noticeable cuff.

    Step 6: Cut and discard the bottom of the sweatshirt.

    Spread the sweatshirt out with the looped arms on top. Using your pins, mark around the external edge of the arms. Cut along the line of pins, ensuring you cut through both layers of material.

    Step 7: Stuff the body of the sweater.

    Utilizing the rest of your stuffing or a pillow, stuff the body of the sweatshirt in between the arms.

    Step 8: Sew the arms to the body.

    To complete your DIY animal bed, turn the sweater over and stitch the arms of the sweater to the body as safely as possible. Turn the bed back over and gift it to your cat or lap dog!

    6. Kitty condominium

    What you’ll need

    • Cardboard box
    • Tee shirts
    • Rubber bands


    Wrap the t-shirt around the box, and connect the sleeve holes with rubber bands. Use a box cutter or scissors to cut a hole in the box where the tee shirt neck is. Usage hot glue to decorate the box with feline toys, flowers, and tassels.

    These DIY pet items are a fun, innovative method to celebrate Earth Day with your animal buddies. Have a good time, and make sure to send us photos of your completed tasks!

    The post 6 DIY environment-friendly pet tasks appeared first on Animal Wellness Magazine.